Gantry machining center must pay attention to these aspects during processing!

Do we know what we need to pay attention to when using the gantry machining center? Here we can give you some introductions. The gantry machining center refers to a machining center with the spindle axis and the workbench set perpendicularly. The overall structure is a portal structure, consisting of double It consists of upright columns and top beams, with a crossbeam in the center. It is especially suitable for processing large workpieces and workpieces with complex shapes.Brass cnc machining center must pay attention to these aspects during processing!

• 1. Gantry machining center operators should understand and grasp the performance and characteristics of the gantry machining center machine. Ensure that the emergency continuous switch can function quickly and effectively when an emergency situation occurs to prevent injury accidents.
• 2. Wear work protective equipment as required, and operating with gloves is prohibited.
• 3. When operating the equipment, do not touch the electronic switch with wet hands to prevent electric shock. Never touch any moving parts with your hands.
• 4. Do not place things or non-processed workpieces on the gantry machining center or moving objects.
• 5. The computer table or work table next to the gantry machining center must be solid and must not be placed on moving copper cnc machining parts.
• 6. When loading and unloading the workpiece, the machine operation should be continued first, and attention should be paid to maintaining an appropriate distance between the workpiece and the tool. When the machine is operating, please do not open the front door and the left and right covers at will to prevent personal injury.
• 7. After the tool is set, please run it with DRYRUN first to confirm that the program is correct.
• 8. When shutting down after power outage or emergency continuity, the three axes should be restored to their original mechanical position.
• 9. It is not allowed to remove the travel switch or any related parts of the protection switch without permission.
• 10. Before finishing the work and leaving the machine, the control power switch on the operation panel and the main switch of the electrical box should be turned off.