No matter how good the vertical machining center is, if there is abnormal noise in the belt, you have to solve it.

Vertical machining centers are used in many different fields because of their many functions. In order to let us better understand its development, let us take a look at the functions of vertical machining centers. What are they?

1. Shorten the entire processing process

A very important function of the vertical machining center is that it can shorten the entire cnc drilling process. It can simplify the traditional processes, which will also save a lot of costs when completing the entire processing.

2. Improve processing efficiency

In addition, it can also better improve the efficiency of the entire processing. It can transform the titanium cnc turning and manufacturing of some complex workpieces into mechanized operations, which can simplify the processes and make the entire processing process easier. become more and more smooth.

The belt-driven spindle of the vertical machining center has been used for a long time, and the spindle box belt makes abnormal noises. Most of this is a belt problem. Next, let’s take a look at the reasons for the abnormal noise of the belt spindle of the vertical machining center.

The tension of the belt connecting the spindle to the servo motor is too high

The tension of the belt connecting the main shaft to the servo motor cannot be too tight. If it is too tight, it will easily cause the belt to wear, slip, and make abnormal noises.

The belt tension connecting the spindle to the servo motor is too low

The tension of the belt connecting the spindle to the servo motor cannot be too low. If the tension is too low, it will appear that the belt connecting the spindle to the servo motor is too loose. This will easily cause slipping during heavy cutting, and the slipping will make abnormal noises.

The belt connecting the spindle to the servo motor is damaged

Generally speaking, if a vertical machining center is used for a long time, it will inevitably have some defects, such as the transmission belt, which will wear out over time, which is also one of the reasons for the abnormal noise made by the belt. Therefore, the transmission belt with better quality will last longer, and the transmission belt with inferior quality will last shorter.

The tooth profile of the transmission belt does not match the tooth profile of the servo motor and spindle​

Since the transmission belt of the vertical machining center will cause some wear and tear after being used for a long time, many customers purchase and replace the transmission belt by themselves in order to save costs. After replacement, they find that the tooth profile of the transmission belt does not match the tooth profile of the servo motor and spindle. , it will cause abnormal noise during use. It is recommended that when purchasing a drive belt, customers must pay attention to whether the purchased drive belt is the same model as the disassembled worn belt. If a different model of 6061-T Fingerprint Solid State Hard Drive Housing belt is persisted in use, it will cause the belt to make abnormal noises during the transmission process, and even cause The gears of the servo motor and spindle are worn, causing serious consequences.